When the IPv6 protocol in Windows 10 network adapter is causing issues, listed here are the exact steps to fully turn off or disable IPv6 in Windows 10.

Windows 10 has built-in support for IPv6 protocol. If your ISP is providing IPv6 service, you can use it in Windows 10 without any other extra configuration or hassle. Though the IPv6 support is growing daily, it is still less abundant as IPv4. In fact, most internet services only use IPv4. Due to that, under certain situations, the built-in IPv6 in Windows 10 may cause compatibility issues with installed software or hardware that just works together with IPv4.

For example, some VPN connections, especially those provided in work environments are notorious when it comes to working alongside the IPv6. If the IPv6 causes problems or you just do not want it for whatever reason, it is simple to switch off IPv6 in Windows 10.

Within this simple and quick guide, allow me to show the particular steps to disable IPv6 in Windows 10.

How to disable IPv6 in Windows 10

You can switch off IPv6 from the network adapter settings in the Networking and Sharing Center in the user interface. Here're the steps.

Open the User interface in Windows 10.
After opening the control panel, set the "View by" around the top-right corner to "Large icons".
Click on the "Network and Sharing Center" option.
Here, click on the "Change adapter settings" link on the left panel.
Now, right-click around the active network adapter and choose "Properties".
Go to the "Networking" tab.
Here, uncheck the "Internet Protocol Version 6 (TCP/IPv6)" option.
Click on the "Ok" button to save changes.
Close the network connections as well as networking and sharing center windows.

That is all. You've successfully disabled the IPv6 protocol in Windows 10. The settings are automatically applied. There is no need for just about any system restart. If you think the settings aren't applied, disable and enable the network adapter. It'll force the settings to apply.

Note: If you have multiple network adapters then follow the same steps for each adapter.

PowerShell command to disable IPv6

The IPv6 in Windows may also be disabled using a PowerShell command. Here's the PowerShell command to show off IPv6.

Open the beginning menu.
Type "PowerShell", right-click around the result and select "Run as administrator".
After opening the PowerShell window as admin, execute this command to obtain all of the network adapter names with IPv6 enabled.
Get-NetAdapterBinding -ComponentID ms_tcpip6
Next, execute the below command to disable IPv6 on a specific network adapter. Replace "NetAdapterName" with the actual network adapter name you have using the earlier command.
Disable-NetAdapterBinding -Name "NetAdapterName" -ComponentID ms_tcpip6
(Optional) To turn off IPv6 on all network adapters, use the below PowerShell command.
Disable-NetAdapterBinding -Name "*" -ComponentID ms_tcpip6
Close the PowerShell window.

Once you execute the command PowerShell will disable the web Protocol version 6 in Windows 10.

How to turn off IPv6 via Command Prompt

You can use the great old Command Prompt to quickly disable the web protocol version 6. Here the steps you need to follow.

Open the Command Prompt as admin.
After open the cmd as admin, execute the below commands one by one.
netsh interface teredo set state disabled
netsh interface ipv6 6to4 set state state=disabled undoonstop=disabled
netsh interface ipv6 isatap set state state=disabled
As soon while you execute the commands, they will disable IPv6 on all network adapters.
Close the Command Prompt window.

If the taskbar is becoming crowded and clunky, you can group similar taskbar icons or programs directly from the taskbar settings. Here's how.

As I said many times, the taskbar is among my personal favorite things in Windows 10. You can do several things around the taskbar like pinning your most used applications, pin folders, pin the trash can to keep the desktop clean, etc. Whenever you pin several things there are apps running actively, the taskbar becomes crowded quickly. Put simple, the taskbar is hugely useful in day to day life and it is far more an involved tactic to customize and manage taskbar icons. To makes things a bit tidier, you are able to group similar icons together on the taskbar. Once grouped, these icons will stack on a single another to free up space.

Within this quick guide, allow me to show the steps to quickly group icons around the taskbar in Windows 10.

Steps to Group Similar Icons on Taskbar

To group icons around the taskbar, you need to select the "Always, hide labels" option within the taskbar settings. Here are the exact steps you need to follow to select that option.

Press the "Windows Key + I" keyboard shortcut to open the Settings.
Go to the "Personalize" page.
Here, click on the "Taskbar" option around the left panel.
Select "Always, hide labels" option in the "Combine taskbar buttons" dropdown menu.
Settings are saved automatically.
Close the Settings app.

As soon as you choose the "Always, hide labels" option, Windows will group all of the similar icons into stacks around the taskbar. For example, for those who have two Chrome Windows opened, Windows will group the above icons right into a stack. It is simple to choose the window you want in the taskbar thumbnail preview.

If you wish to, you can also select the "When taskbar is full" option. This option will automatically group the icon once the taskbar is full and has no space for new icons.

If you're one of the many Mozilla Thunderbird users, you'd better look for updates since the parent company just presented a new version of the app.

Currently probably the most popular email clients available, Mozilla Thunderbird is getting regular updates, albeit in most of the cases, these new releases only include additional polishing and bug fixes.

Firefox 78.2.0 perfectly aligns with this particular approach, and the version number is the first indicator the focus in this update is on improving the performance from the app and resolving bugs in some places.

First of all, there's an essential mention that concerns OpenPGP, which was supposed to be enabled by default with this release. Mozilla says this change has been pushed back, with additional information to become shared at another time.

"Originally it had been announced to enable OpenPGP by default in version 78.2.0. It's been chose to slightly postpone this for final changes and testing by volunteers. Begin to see the wiki based on how to allow and assist with testing," the dev team explained.

You will find five different notable alterations in this new update, and 2 seem to be related to OpenPGP. Specifically, starting with this new version of Thunderbird, the OpenPGP key generation is automatically disabled if no email account is configured. After which, Thunderbird 78.2.0 also encrypts the saved drafts when OpenPGP is enabled.

Another change concerns the Twitter integration, as the dev team has decided to take away the search for this service completely. So starting with this update, you're no more allowed to search Twitter for certain information.

Today's update also introduces theme support for that calendar event summary dialog, while also enabling MailExtensions caching by requiring some APIs to make use of defineLazyPreferenceGetter.

As far as the bugfixes are concerned, there are many them, and when again, several are targeted at the OpenPGP support. Specifically, Thunderbird 78.2.0 resolves a problem wearing down looking feature within the OpenPGP Key Manager, along with the Key Properties dialog that was sometimes too small.

The email app also includes address book performance optimizations and resolves a problem breaking down the new mail account window from Account Settings, which sometimes failed to open. And starting with this update, the signature should no longer be lost after closing the account settings, Mozilla explains within the official release notes of today's build.

You can check out the full changelog within the box following the jump.

"Just like the previous version, there's an essential warning for add-ons, as Thunderbird might no longer work with older extensions due to switch to MailExtensions. By version 78.0, Thunderbird only supports MailExtensions. Your favorite add-ons may not have been updated for compatibility. At the moment, users of the Enigmail Add-on should not update to Thunderbird 78," Mozilla explains.

Thunderbird 78.2.0 obtainable while using built-in automatic update engine, however this is only available if you're already on version 78. However, if your system is running Thunderbird 68 or earlier, today's update needs to be downloaded manually, because this older release does not support the automatic update to Thunderbird 78.

The system requirements haven't changed in any way, so on Windows devices, you must be running a minimum of Windows 7 to set up the new Thunderbird version ¡§C keep in mind, however, that Windows 7 is not support since January this year, therefore the upgrade to a newer Windows version is usually recommended.

On Linux, GTK+ 3.14 or later is recommended, while in to run Thunderbird 78 with an Apple computer you'll need a minimum of macOS 10.9.

Mozilla officially announced its very own VPN service captured, and also the company promised it would bring support for other platforms at some point in the near future.

While no specifics were provided, Mozilla continues to be focusing on the official clients for Linux and Mac, so nobody knows without a doubt when users could connect with the VPN service if they're running one of these simple two platforms. Fortunately, the dev community lends Mozilla help, so while everyone is awaiting the organization to bring Mozilla VPN to Linux and Mac, here's a third-party tool that does might a little more.

As discovered by GHacks, the app is known as MozWire, and it is on GitHub as an open-source project. It's not aimed limited to Linux, but at several other platforms too, including Windows, in which the official Mozilla VPN client can also be offered.

"MozWire is definitely an unofficial cross-platform client for MozillaVPN, finally giving Linux, macOS, FreeBSD, OpenBSD yet others (all platforms supporting the WireGuard protocol) users access for this VPN provider. MozWire will also support Windows," the official description published by the developer explains.

When you will find all instructions to install and run this unofficial Mozilla VPN client on Linux and macOS around the GitHub page linked above, what you ought to know is that the app also has a series of additional features unavailable within the official app.

For example, among the cool features that Mozilla isn't offering is support for multihop servers, and the developer explains that their app has additionally been specifically created to allow users to find the remote port, thus making it possible to bypass firewalls. Again, this really is something that's unavailable within the official Mozilla client, but I think the company should add this at some point in the future given it's quite important functionality for lots of users behind firewalls.

Additionally, MozWire also supports native WireGuard clients that are offered around the platforms in which the app is deployed.

At this time, Mozilla VPN is only available on Windows 10, Android, and iOS in some regions, like the Usa, the uk, Canada, New Zealand, Singapore, and Malaysia. Support for Mac and Linux is still listed as coming soon on Mozilla's website.

"The new VPN clients are suitable for Android (version 6 and up), Windows 10 (64 bit), and iOS. Mac and Linux customers are not far off," Mozilla explains.

Mozilla VPN is available with a $4.99 per month subscription, also it offers support for more than 280 servers in more than 30 countries. One subscription can be used for 5 devices, and Mozilla promises that it doesn't log any network activity when clients are connected to VPN.

"We don't log, track, or share any of your network activity. We adhere strictly to Mozilla's Data Privacy Principles, and we only collect the most minimal data necessary to keep your VPN healthy and operational," Mozilla explains. "WireGuard protocol encrypts your network traffic protecting all of your private information. When compared with existing VPN protocols, WireGuard's lightweight code is easier for security analysts to examine and audit - making it a far more secure option for the VPN. Additionally, your online activities can remain anonymous because we never log, track or share your network data."

During the time of writing, Mozilla VPN remains available only on Windows, Android, and iOS, and the company hasn't shared any specifics regarding when it plans to roll out the Linux and Mac clients. Simultaneously, the organization didn't reveal when it intends to expand Mozilla VPN to more regions besides the ones mentioned above.

AMD has announced the availability of a latest version of their Radeon Software Adrenalin Edition Graphics driver, namely the 20.8.2 (20.20.01.16) package, which adds support for Microsoft Flight Simulator, Mortal Shell, in addition to Marvel's Avengers Open Beta.

Moreover, the current release also includes compatibility using the An overall total War Saga: Troy title and offers to supply to 12% better FPS performance while using the High preset around the Radeon RX 5700 XT cards.

Besides these improvements, the 20.8.2 update resolves the machine hangs encountered when exiting system sleep (on some AMD Ryzen 3000 Series products) and corrects the improper error messages displayed by the Upgrade Advisor.

However, AMD's driver may still notice a few problems with Radeon RX 5700, Radeon RX 5000, Ryzen 7 3000, and Ryzen 4000 system configurations, as well as with Enhanced Sync, FreeSync, and Performance Metrics Overlay much like described within the Release Notes below.

When it comes to compatibility, besides a supported GPU, take into account that your configuration should be managing a 64-bit variant of Microsoft's Windows 7 or Windows 10 os's. There are two files available, one for each platform.

Therefore, remove any previous version present on your computer, save and run the right package for your system, wait for all files necessary to be produced available, and follow all instructions shown on the screen for a complete upgrade.

With this thought, if you consider employing this release, download AMD Radeon Adrenalin Edition Graphics Driver 20.8.2, do the installation and execute a reboot once finished. Also, return around to stay "updated about a minute ago."

If you want Mac mouse cursors, you are able to set them up in Windows 10 too. Here are the steps you should follow to install mac cursor in Windows 10.

The default cursor style in Windows 10 is fairly good. If you wish to, you may also change the cursor size. Fortunately, if you do not such as the default cursor style in Windows 10, you can change it out to whatever you want using CUR files.

For example, when compared to regular pointer cursor, I really like the gloved pointer in macOS. If you too like the mac cursor styles, you are able to set them up in Windows 10 making the Windows cursor seem like mac cursor. All you have to do is download mac OS Mojave cursor or mac OS high sierra cursor and add them to the Windows 10 pointer styles.

In this quick and simple post, allow me to demonstrate the procedure to set up the mac mouse cursor in Windows 10.

How to Install Mac Cursor in Windows 10

First, visit the Github page to download macOS Sierra cursors for Windows.
On the page, click on the "Code" dropdown menu and select the "Download as zip" option. This will download the cursor pack.
After downloading the zip file, extract the folder inside it to the desktop.
Open the extracted folder.
Find the "Install.inf" file.
Right-click on the "Install.inf" file and choose "Install".
If you notice a UAC (User Access Control) prompt, click "Yes".
You've installed the mac cursors in Windows. You now have to apply them.
To use mac os cursors in Windows, open the Settings app.
Go to the "Devices" page.
Go to the "Mouse" page.
Click the "Additional mouse options" link.
Visit the "Pointers" tab.
Select "macOS Sierra 200" from the Scheme dropdown menu.
Click "Ok".

That is all. As soon as you click on the Ok button, Windows will apply the mac os cursors in Windows 10. Actually, you can instantly see the new cursor in action.

When you are saving the changes, if you notice a Replace Scheme prompt, click "No".

Restore Default Windows Mouse Cursor

When needed, you can reset the Windows cursors to its original scheme. Here's how to get it done.

Open the Settings with "Win + I" keyboard shortcut.
Go towards the "Devices → Mouse" page.
Click around the "Additional mouse options" link.
Go to the "Pointers" tab.
Select "Windows Default (System scheme)" in the Scheme dropdown menu.
Click "Apply" and "Ok" buttons.

Once you save the changes, the default Windows cursor scheme is going to be restored. You will see the alterations instantly.

Every time your computer boots or wakes from sleep, you have to click your mouse button or swipe up to make the lockscreen disappear before you get hit having a login prompt.

It can save you time and a click by disabling the lock screen on and on right to the login screen in Windows 10. Here's how.

1. Open the registry editor. Hit CTRL + R, then type regedit into the prompt striking Enter. Click Yes should you receive a warning from User Account Control.

2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows by opening the various folders within the tree.

3. Produce a new registry key called Personalization if one doesn't already exist. To create the important thing, right click in the right pane, select Key from the menu and then rename the key to "Personalization."

4. Navigate the Personalization key.

5. Right click in the right pane and select New then DWORD (32-bit) Value.

6. Name the new value "NoLockScreen" (without quotes).

7. Set NoLockScreen to 1 by double hitting its name, entering a "1" within the Value data field and hitting OK.

After the next reboot, the lock screen will be gone. If you want to re-enable it, just alter the registry setting from 1 to 0.

The Windows 10 Taskbar already enables you to pin your favorite websites, but navigating to a specific one is hit or miss with Cortana. If you want to skip the frustration, there's an easy tweak that allows you to incorperate your own URL field, this provides you with you the ability to navigate to any website while not having to open a browser first.

1. Right click on the Taskbar and unlock it by clicking the Lock the taskbar option. If the option isn't checked, you can skip this step. It ought to come checked automatically, though.

2. Right click once again and click Toolbars > Address.

3. Now, you have a URL field towards the bottom right of the Taskbar. For doing things, simply type in a URL and press enter. Windows will open the hyperlink in your default browser.

4. To get rid of it, simply work in reverse order and repeat steps 2 and 1.

Not too long ago, Microsoft silently started working on something that many users considered to be huge news: support for Android apps on Windows 10 Mobile, an update that will have resolved the lack of apps on the mobile platform for good.

And while the software giant has already abandoned Windows 10 Mobile, the program to create Android apps to its operating system is still on the table. And the great news is the fact that it's already happening.

Microsoft has recently announced that the Your Phone app will be updated with new functionality that will allow users to run Android apps directly on their Windows 10 desktops.

First of all, what's Your Phone? This new app, which works mostly with Samsung phones, allows Android devices to pair their mobiles with Windows 10 computers and then access the photo gallery, get phone notifications on the desktop, as well as mirror the screen using the pc.

Theoretically, this is something which sounds pretty cool, but however, it's also a well known fact that massive improvements are still required. For instance, refreshing notifications is often a painfully slow procedure that takes additional time than it should, eventually defeating the objective of staying up-to-date with what's happening on the phone.

But Microsoft doesn't want to stop here and has recently caused Samsung for an even more groundbreaking feature that will allow users to run Android apps on Windows 10.

As compared to the original plan that Microsoft been on mind for Windows 10 Mobile, Windows 10 users won't be allowed to install Android apps directly but run them using their cellular devices. This means the Samsung phone needs to be paired with Windows 10 through the Your Phone app.

The knowledge with Android apps is going to be as native as you possibly can, so you'll even be in a position to pin them to your taskbar, even when they're actually installed on the Samsung smartphone. Furthermore, they'll display in the Alt + Tab app switcher, alongside Windows apps and Microsoft Edge tabs.

These apps will run in their own individual dedicated window outside the Your Phone app, so overall, it'll be pretty much an Android app running on Windows 10, all powered by a mobile phone linked to your computer.

There are limitations, and Microsoft names some of them:

Only the Galaxy Note20 supported initially, more devices coming at a later time
Not all Android apps is going to be supported
Some apps might only support touch input
Some apps might block mirroring on the desktop
Some apps might display a black screen instead of the UI
Running multiple apps side by side will get to a later time

"A phone buzzing while you are in your work flow on your computer may be the very last thing you need, especially with the constant stream of interruptions we're facing while trying to operate in new conditions. Microsoft's Your Phone app and Connect to Windows integration on select Samsung devices, allows you to remain in the flow by allowing you to take calls, check notifications, see photos and messages, all from your Windows 10 PC. Now, on your Samsung Galaxy Note20, you are able to access and communicate with your favorite mobile apps directly on your Windows 10 PC with the Your Phone app," Microsoft announced earlies today.

In terms of what Samsung phones will support all of these features, this really is something that remains to be seen, but I'm guessing that the Galaxy S10 and also the Note10 will be the models which will almost certainly allow running Android apps around the Windows 10 desktop.

Both Google Chrome and Microsoft Edge have were able to improve their share of the market in July 2020, based on third-party numbers from NetMarketShare, by the design of products, the largest victim of the continued growth appears to be the one and only Firefox.

Mozilla's application is definitely the second most-used desktop browser, however that Microsoft Edge has completed the switch to Chromium people these days give it a shot, its market share is continuously declining.

And Firefox is actually heading down so fast that it already lost the second place, with Google Chrome and Microsoft Edge now spearheading the desktop browser market.

Recently, Google Chrome increased its market share from 70.19% to 71.00%, while Microsoft Edge jumped from 8.07% to 8.46%. Meanwhile, Firefox declined from 7.58% to 7.27%.

The new Microsoft Edge

The migration to the Chromium engine allowed Microsoft to show Edge into a cross-platform browser, and this is one of the reasons that contributed to the development of the new app.

Edge has become available not only on Windows 10, but also on Windows 7, Windows 8, Windows 8.1, as well as macOS. At the same time, Microsoft can also be focusing on a Linux form of the browser, along with a preview build is anticipated after the year.

But what made Microsoft Edge the 2nd most-used desktop browser available so quick following the switch to Chromium is certainly Microsoft offering it as being the default browser in Windows 10.

The brand new Edge replaces the legacy form of the browser because the default app in the operating system, with Windows 10 itself also becoming the world's number 1 desktop platform, Edge's share of the market increases too. Microsoft offers the new Edge both as a manual download so that as an automatic update on Windows 10 devices.